Graco HydroShield WABH00 Instructions - Parts Manual page 63

Maintenance Maintenance 8: 8: 8: Pump Maintenance Pump Maintenance Pump
View information about maintaining the isolation fluid
pump, including cycles and calendar days since the
last stall test.
Pump: Pump: Dispense cycles since the last maintenance Pump:
event.
Total Volume: Volume: The total volume of fluid dispensed by
Total Total Volume:
the system, based on pump cycles. The total does
not include material pushed through the system in
Prime mode.
Pump Stall Stall Test: Test: Refers to the pump stall
Pump Pump Stall Test:
test. This count is cleared automatically when
a pump stall test is completed. Follow the
Pump Stall Test Procedure, page
3A8492A
Maintenance Maintenance
60.
Maintenance 9: 9: 9: V/P Maintenance Maintenance V/P V/P
Use the V/P (Voltage to Pressure) screen to test the
function of the electro/pneumatic regulator (415) and
determine whether fluid pressure is being supplied
to the gun.
Fluid: Check the box for the V/P to deliver a test fluid Fluid: Fluid:
pressure when the fluid is actuated.
Setup Menus
63