Events Screen; Status Screens - Graco HydroShield WABH00 Instructions - Parts Manual

Run Menus

Events Screen

Screen
Events Events Screen
Use the Events screen to view the last 99 status
messages generated by the isolation system. Click
the up and down arrows on the right of the screen to
scroll through the messages.
Each message line includes the date, the time, and
the status code. See Error Codes, page

Status Screens

Screens
Status Status Screens
The Status screens display a summary of the input
signals that are monitored by the system and the
solenoids that drive system activity. The screens are
for information and troubleshooting purposes.
Status Status Screen Status Screen 1 1 1 Screen
The Status screens display a summary of the input
signals that are monitored by the system and the
solenoids that drive system activity. The Status
screens are for information and troubleshooting
purposes.
Inputs
Inputs Inputs
50
Inputs are signals that the system acts on. When the
status circle next to the input appears yellow, the
sensor is activated.
System Stop:
• System System
that tells the system to stop. The system stop
pneumatic input is available only when the optional
System Stop Pneumatic Input Kit 26B414 is
installed. To install, see
81.
Stop Pneumatic Input Kit, page
• System System Stop: System
that tells the system to stop. The system stop
digital input is available only when the optional
Optocoupler Kit 24Z226 is installed. To install, see
Install the Optional System Status Output, page
• Inlet Inlet Air: Inlet
pressure 70 psi (0.5 MPa, 4.8 bar) is detected.
• Shuttle Shuttle Shuttle Top:
isolation valve is in the top position.
Shuttle Bottom:
• Shuttle Shuttle
isolation valve is in the bottom position.
• Gun Gun Flush Gun
gun flush box is closed. Not used on automatic
systems.
• Fluid Fluid Trigger: Fluid
that the gun is triggered. Not used on automatic
systems.
Solenoids Solenoids Solenoids
Electrical to pneumatic actuators that drive system
activity.
• Shuttle Shuttle Shuttle Down:
open for filling.
Shuttle Up:
• Shuttle Shuttle
closed for isolating the charged fluid.
• Shuttle Shuttle Shuttle Eject:
isolation valve up from the seat.
Shuttle Fluid
• Shuttle Shuttle
system fluid inlet.
• Pump Pump Pump Fluid
isolation fluid pump fluid inlet when it is present.
This fluid valve is not present in standard systems.
Purchase a conversion kit to replace a spring
check valve with a pneumatically activated fluid
inlet valve.
• Pump Pump Pump Pressure:
isolation fluid pump.
Ground Rod:
• Ground Ground
allow the system to build a charge.
• Gun Gun Flush Gun
gun flush box. Not used on automatic systems.
• System System System Status:
okay to spray.
Stop: Air: Air: The external pneumatic input
Stop: Air:
Install the Optional System
Stop: Digital: Stop: Digital: The external electrical input Digital:
Air: Indicates the minimum required air Air:
Top: The sensor that indicates that the Top:
Bottom: The sensor that indicates that the
Bottom:
Flush Box: Flush Box: The sensor that indicates that the Box:
Trigger: The air flow switch that indicates Trigger:
Down: Down: Drives the isolation valve down and
Up: Drives the isolation valve up and
Up:
Eject: From the down position, ejects the Eject:
Fluid In: In: Opens the fluid valve near the
Fluid In:
Fluid In: Fluid In: Opens the fluid valve near the In:
Pressure: Activates the air pressure to the Pressure:
Rod: Activates (raises) the ground rod to
Rod:
Flush Box: Flush Box: Box: Activates the gun trigger in the
Status: Status: Indicates to the system that it is
24.
26.
3A8492A