Control Interface - Graco HydroShield WABH00 Instructions - Parts Manual

Control Interface

Control Interface Interface
Control Control Interface
The control interface displays graphical and text
information related to setup and spray operations.
Soft keys are used to input numerical data, enter
setup screens, navigate within screens, scroll through
screens, and select setup values.
Most information is communicated using icons to
simplify global communication. The soft keys are
membrane buttons whose function correlates with
the screen content to the immediate left or right of the
button.
NOTICE NOTICE NOTICE
To prevent damage to the soft key buttons, do not
press the buttons with sharp objects such as pens,
plastic cards, or fingernails.
36
1 2 3
4 5 6
7 8 9
0 .
Soft Key Key Function Function
Soft Soft Key Function
Power Power Power
When the system is in Off mode, press
to activate the system. This button puts
the system into Standby mode.
Stop Stop Stop
Stop Stop Stop Press to stop the system immediately.
This button puts the system into Off
mode and turns off air and fluid to the
gun.
Navigation Navigation Navigation
Left/Right Arrows: Use to move from
screen to screen.
Up/Down Arrows: Use to move among
the fields on a screen, to move through
the items on a drop down menu, or to
move among multiple screens within a
function.
Keypad Keypad Keypad
Use to input values.
1 2 3
4 5 6
7 8 9
0 .
Cancel Cancel Cancel
Use to cancel a data entry field.
The cancel button cannot be used
to acknowledge events. (See the
description for the Enter soft key.)
Setup Setup Setup
To unlock the Setup menus, press
Setup. If a password is configured,
enter the password. (Default: 0000.)
See Advanced Screen 1, page
To exit the Setup menus, press unlock
again.
Enter
Enter Enter
Press to choose a field to update, to
make a selection, to save a selection
or value, to enter a screen, or to
acknowledge an event.
55.
3A8492A