Graco HydroShield WABH00 Instructions - Parts Manual page 56

Setup Menus
Advanced Advanced Screen Advanced Screen 3 3 3 Screen
Use the settings on this screen to enable the system
to send or receive data via USB.
Enable USB USB Downloads/Uploads: Downloads/Uploads: Check this box
Enable Enable USB Downloads/Uploads:
to enable USB download and upload of system
information. When enabled, the Download Depth
field becomes active.
Download Download Depth: Download Depth: Depth: Enter the number of days for which
data retrieval is allowed. For example, to retrieve
data for the previous week, enter 7.
Log 90% 90% Full Full Advisory Advisory Enabled:
Log Log 90% Full Advisory
(default), the system issues an advisory when the
memory log becomes 90% full. At that point or
before, perform a download to avoid loss of data.
See Download System Data, page
For information about troubleshooting
messages related to the Advanced screens,
see Error Codes, page
Advanced Advanced Advanced Screen Screen 4 4 4 Screen
Use this screen to update the software part numbers
and versions for the system components. Refer to
this screen when contacting a Graco distributor for
technical assistance.
56
Enabled: When enabled
Enabled:
40.
81.
Press the soft key next to the magnifying glass
to display system software details for each
module.
• A green check mark
are current with the system version.
• A red cross mark
of the modules contain software versions that differ
from what is expected. If this is the case, a red box
flashes around the magnifying glass. The software
that is mismatched is highlighted in light red.
Scroll to the right to display more information about
the system. The column header for the serial number
of the module is shown as
Press the magnifying glass to return to the previous
screen.
To update the system software, follow the procedure
in Update the System Software, page
indicates that all modules
indicates that one or more
.
41.
3A8492A