Graco HydroShield WABH00 Instructions - Parts Manual page 140

Technical Specifications
Technical Specifications Specifications
Technical Technical Specifications
HydroShield Air Air- - - Assisted Assisted
HydroShield HydroShield Air Assisted
Waterborne Isolation Waterborne Waterborne Isolation System Isolation System System
Maximum Fluid Working Pressure
Maximum Fluid Inlet Pressure
Maximum Air Working Pressure
Minimum System Inlet Air
Pressure
Maximum System Inlet Air
Pressure
Maximum Fluid Operating
Temperature
Short Circuit Current Output
Voltage Output
Sound Power (measured per ISO
Standard 9614)
Sound Pressure (measured 3.28 ft
(1 m) from equipment)
Isolation System Air Inlet Fitting
Isolation System Fluid Inlet Fitting
Isolation System Fluid Outlet
Fitting
Wetted Parts
Maximum Fluid Conductivity
Maximum Fluid Hose Length,
Maximum Inside Dimension
Weight
Ambient temperature range
System Air Consumption
Power Connection
External Power Requirements
140
U.S.
U.S. U.S.
3000 psi
100 psi
100 psi
70 psi
100 psi
120°F
150 microamperes maximum
at 70 psi: 83.4 dB(A)
at 70 psi: 73.5 dB(A)
Isolation System: Polyethylene, Stainless Steel, Acetal,
Fluoroelastomer, PTFE, UHMWPE, Polyurethane, Tungsten carbide
with 6% nickel
250 ft, 16 in.
322 lb
41˚F–122˚F
Range of total air flow under normal spraying conditions:
Straight IEC 320–C13 male connector. Also included:
North America NEMA 5-15 male plug
China / Australia AS/NZS 3112 male plug
Continental Europe CEE 7/7 male plug
United Kingdom BS 1363 male plug
100-240 VAC, 50-60 Hz, 2 amp maximum draw, 15 amp
maximum circuit breaker recommended
20.7 MPa, 206.8 bar
0.7 MPa, 7.0 bar
0.7 MPa, 7.0 bar
0.48 MPa, 4.8 bar
0.7 MPa, 7.0 bar
60 kilovolts maximum
at 0.48 MPa, 4.8 bar: 83.4 dB(A)
at 0.48 MPa, 4.8 bar: 73.5 dB(A)
1/2 npt(m)
1/4 npsm(m)
1/4 npsm(m)
2000 μS/cm
4-10 scfm, 113-283 lpm
Metric
Metric Metric
48°C
76.2 m, 4 mm
146 kg
5˚C–50˚C
3A8492A