Graco HydroShield WABH00 Instructions - Parts Manual page 62

Setup Menus
Maintenance Maintenance 6: 6: 6: Output Maintenance Output Resets Output
Use this screen to view system output counts, reset
those counts, and test the output. Install kit 24Z226
to use this feature.
For details, see
Install the Optional System Status Output, page
System System System Status: Status: The system status output, which tells Status:
an external device if the system has an error or is off.
Unchecked box: Output off; indicates a system error
or the system is off.
Checked box: Output on; indicates that the system is
ready or active.
ES Enable: Enable: The ES enable output, which sends out
ES ES Enable:
a pneumatic and electrical signal used to turn on
electrostatics.
Low Low Low Paint: Paint: The low paint output which makes an Paint:
electrical connection to signal that the system is low
on paint.
62
Resets and Resets and Test and Test Test
26.
Maintenance 7: 7: 7: Isolation Maintenance Maintenance Isolation Valve Isolation
Use this screen to view isolation valve actuation
counts and reset those counts. The counters are
useful to monitor solenoid, air cylinder, or bearings
use.
The cycles increase each time the isolation valve
engages. Each item can be reset at different times,
based on maintenance schedules.
Isolation Valve: Valve: Monitors each time the isolation
Isolation Isolation Valve:
valve engages.
Isolation Valve Valve Seal: Seal: Monitors the life of the fluid
Isolation Isolation Valve Seal:
seals in the isolation valve assembly.
Wash Wash Fluid: Wash Fluid: Monitors the life of the wash fluid. The Fluid:
wash fluid keeps the isolation valve seal clear from
material.
Valve Maintenance Valve Maintenance Maintenance
3A8492A