Graco HydroShield WABH00 Instructions - Parts Manual page 77

Troubleshooting Troubleshooting Troubleshooting HydroShield HydroShield Voltage HydroShield
Grounded components:
• The cabinet.
• All the parts mounted in the top half of the
cabinet.
• The top of the isolation valve.
• The fluid inlet valve and hose.
• The air section of the isolation fluid pump.
• The air cylinder of the ground rod.
• The top of the bleed resistor.
Isolation components:
• The tie rods of the isolation valve.
• The middle section of the isolation fluid
pump.
• The body of the bleed resistor.
• The body of the ground rod.
• The plastic enclosure and stand.
• The electrostatic shields that slide in the
front.
• The waterborne fluid hose.
All the fluid components are high voltage:
• The wash fluid bottle.
• The bottom of the isolation valve.
• The bottom of the isolation fluid pump.
• The fluid hoses.
• The high pressure pump and fluid filter.
• The bottom of the bleed resistor.
• The ground rod.
3A8492A
Voltage Voltage
Grounded components: unshaded
Isolation components: gray
High voltage: red/dark
Troubleshooting
77