Run Screens And Setup Screens - Graco HydroShield WABH00 Instructions - Parts Manual

Control Interface
Run Screens Screens and and Setup
Run Run Screens and
The control interface uses two sets of screens:
• The Run screens control spraying operations and
display system status and data.
- Home (See Home Screen, page
- Status (See Status Screens, page
- Events (See Events Screen, page
• The Setup screens control system parameters and
advanced features.
- Advanced (See Advanced Screens, page
- Maintenance (See
Maintenance Screens, page
38
Setup Screens Screens
Setup Screens
45.)
50.)
50.)
55.)
59.)
- Calibrate (See Calibrate Screens, page
- System (See System Screen, page
- Pumps (See Pump Screens, page
- Presets (See Presets, page
- Purge (See Purge Screens 1-5, page
Press unlock on any Run screen to enter the
Setup screens. If the system has a password lock,
the Password screen displays. If the system is not
locked (password is set to 0000), the System screen
displays.
Press unlock on any Setup screen to return to the
Status screen.
57.)
66.)
54.)
52.)
53.)
3A8492A