Table of Contents
Advertisement
Installation
Installation
Mount Circulation Pump Assembly
1. Align and overlap pump base (M1) notch to frame
gusset.
2. Align base plate (M2) to pump base (M1) and fasten
with bolts (M3), lock washers (M4) and flat washers
(M5).
10
3. Route the pump ground wire behind the clamp bolts
and attach to the frame gusset using thread forming
screw (21). Older model cart frames may need a
.172 in. (4.4 mm) hole drilled in the gusset in
approximate location shown below.
3A5314B
Advertisement
Table of Contents
