Warnings - Graco HydroShield WABH00 Instructions - Parts Manual

Warnings

Warnings
Warnings Warnings
The following warnings are for the setup, use, grounding, maintenance, and repair of this equipment. The
exclamation point symbol alerts you to a general warning and the hazard symbols refer to procedure-specific
risks. When these symbols appear in the body of this manual or on warning labels, refer back to these
Warnings. Product-specific hazard symbols and warnings not covered in this section may appear throughout
the body of this manual where applicable.
FIRE AND FIRE FIRE AND EXPLOSION AND
Combustible dust or flammable fumes, such as solvent and paint fumes, in work
or explode. To help prevent fire and explosion:
• Fluids used must meet the appropriate flammability requirements:
• Material does not sustain burning in accordance with the Standard Test Method for
Sustained Burning of Liquid Mixtures, ASTM D4206.
• CE CE CE- - - EN
Material is classified as non-ignitable as defined by EN 50059: 2018.
• Electrostatic equipment must be used only by trained, qualified personnel who understand
the requirements of this manual.
Stop operation operation immediately
• Stop Stop operation
equipment until you identify and correct the problem.
• Check gun resistance, hose resistance, and electrical grounding daily.
• Use and clean equipment only in well ventilated area.
• Interlock the gun air supply to prevent operation unless ventilation air flow is above the
minimum required value.
• Only use non-flammable solvents when flushing or cleaning equipment.
• Do not use pail liners unless they are conductive and grounded.
• Always turn the electrostatics off when flushing, cleaning or servicing equipment.
• Eliminate all ignition sources; such as pilot lights, cigarettes, portable electric lamps, and
plastic drop cloths (potential static arc).
• Do not plug or unplug power cords or turn lights on or off when flammable fumes are present.
• Keep work area free of debris, including solvent, rags and gasoline.
• Keep a working fire extinguisher in the work area.
6
WARNING
WARNING WARNING
EXPLOSION HAZARD EXPLOSION HAZARD HAZARD
EN 50348 EN 50348 Compliant: 50348 Compliant: Compliant:
immediately if static sparking occurs or you feel a shock. Do not use
immediately
work area area can ignite
work area
3A8492A