Table of Contents
Advertisement
Setup Software and
Controls
Always follow all the instructions in your system
manuals before and after installing the conversion kit.
See Related Manuals, page 2.
1. Follow the software update instructions in the
system manual. Update Software if needed.
NOTE: The automatic system requires software version
1.011.001 or higher.
2. Refer to the appropriate automatic system manual
to properly configure the system on the setup
screen. See Included Manuals, page 2.
Convert Back to a Manual System
NOTE: The converted system can be used in either
manual or automatic mode.
1. Disable the paint trigger and electrostatic inputs
going to the system.
NOTE: These input signals will cause alarms if they're
active while converting back to a manual system.
2. Disable Auto on the system screen.
3. Refer to your original system manual for proper
setup and operation.
3A8812B
Label the Cabinet
Apply conversion label (19) to the cabinet.
F
. 10 Conversion label location
IG
Setup Software and Controls
11
Advertisement
Table of Contents
