Installing The Lift-Arm Assembly - Toro Groundsmaster e3200 Operator's Manual

4

Installing the Lift-Arm Assembly

Parts needed for this procedure:
1 Right lift arm
1 Left lift arm
2 Large pin
2 Bolt (5/16 x 1 inch)
2 Nut (5/16 x 1 inch)
2 Nut (3/8 inch)
2 Small pin
2 Bolt (3/8 x 1-1/4 inches)
2 Grease fitting
Procedure
Note:
Have an assistant help you to install the lift arms as needed.
1. Remove the lift arms from the shipping skid.
2. Use 2 large pins to install the lift arms to the machine frame
1. Grease fitting
2. Large pin
3. Install the grease fittings to the large pins
4. Use 2 nuts (5/16 inch) and 2 bolts (5/16 x 1 inch) to secure the large pins to the frame
(Figure
Figure 5
3. Lift arm
(Figure 5).
18
5).
(Figure
g432917
6).