Seat Replacement - Toro Z MASTER 2000 Series Service Manual

Right Console Installation (continued)

Seat Replacement

Seat Removal
2000 Series Z MASTER® Service Manual
3438-778 Rev A
g336084
5. Install the 2 bolts and nuts on the front console.
6. Install the shoulder bolt (T30) at the front of the console.
7. Connect the battery by installing the positive cable first, then the negative
cable to the battery.
1. Park the machine on a level surface and disengage the PTO. Stop the
engine, wait for all moving parts to stop, and remove the key. Engage the
parking brake.
2. Disconnect the battery by removing the negative cable first, then the positive
cable from the battery.
3. Unlatch and raise the seat, disconnect the operator presence switch on the
underside of the seat assembly.
4. Lower the seat back into the latched position.
5. Remove the bolt and the seat pivot from each side of the seat.
Figure 30
Page 5–15 Chassis: Service and Repairs