Toro Z MASTER 2000 Series Service Manual page 52

Left Console Removal (continued)
Left Console Installation
Chassis: Service and Repairs
g336093
8. Lift the console upward off of the machine.
9. Install the fuel cap.
1. Remove the fuel cap from the gas tank.
2. Lower the console into place, ensuring that it seats properly on the support.
3. Install the keeper line into the fuel cap, and reinstall the fuel cap.
4. Install the 2 bolts and nuts through the support bracket.
5. Install the 2 (T25) screws through the console bracket.
g336092
6. Install the 2 bolts and nuts on the front of the console.
7. Install the shoulder bolt (T30) at the front of the console.
8. Connect the battery by installing the positive cable first, then the negative
cable to the battery.
Figure 25
Figure 26
Page 5–12 2000 Series Z MASTER® Service Manual
3438-778 Rev A