Toro Z MASTER 2000 Series Service Manual page 58

Fuel Tank Removal (continued)
Fuel Tank Installation
Chassis: Service and Repairs
g336088
1. Vent Hose Assembly
2. Fuel Supply Line
9. Lift the fuel tank assembly from the machine by sliding the tank rearward
and up, away from the frame.
1. Position the fuel tank assembly onto the frame with the vent ports toward the
rear of the machine.
2. Connect the 2 vent lines to the fuel tank.
3. Connect the fuel supply line to the fuel tank and route the fuel line in the
detents molded into the tank.
g336088
1. Vent Hose Assembly
2. Fuel Supply Line
4. Install the fuel tank retainer plate.
5. Install the seat assembly.
6. Install the right and left consoles.
Left Console Replacement (page 5–11)
Figure 34
3. Fuel Shut-Off Valve
Figure 35
3. Fuel Shut-Off Valve
Seat Replacement (page 5–15)
Right Console Replacement (page 5–13)
Page 5–18 2000 Series Z MASTER® Service Manual
3438-778 Rev A