Toro Z MASTER 2000 Series Service Manual page 67

Motion Control Damper Removal (continued)
Motion Control Damper Installation
2000 Series Z MASTER® Service Manual
3438-778 Rev A
g336040
1. Bolts
3. Remove the motion control damper from the machine.
1. Position the motion control damper on the outside of the frame mounting tab.
g336041
2. Torque the rear mounting bolt to 237-305 N • m (200 ± 25 in-lb).
Figure 48
2. Motion Control Damper
Figure 49
Page 5–27 Chassis: Service and Repairs