Yanmar Engine Replacement - Toro Z Master 7500-D Series Service Manual

Yanmar Engine Replacement

Removal
1. Park the machine on a level surface, disengage the PTO and set the parking brake. Stop the engine, wait for all
moving parts to stop and remove the key.
2. Remove the engine hood,
3. Using a jack, secure the rear of the machine with jack stands.
Z Master 7500-D Series Service Manual
March 2018 - Digital Edition
ENGINE
DANGER
While testing the machine with the engine running,
hands, feet, and clothing could get caught in
moving parts, causing serious personal injury. Keep
bystanders away from the machine.
DANGER
Do not remove the radiator cap when the engine
operates, or immediately after it stops. If not, hot water
can spout out from the radiator. Only remove the
radiator cap when it is at a sufficiently low temperature
to touch with bare hands. Slowly loosen the cap to
release the pressure before you remove it fully.
WARNING
Hot engine parts can cause severe burns. Do not
touch engine while operating or just after stopping.
WARNING
Avoid inhaling of exhaust fumes, and never run an
engine in a closed building or confined area.
see "Engine Cover Removal," chapter 5, page 5-40.
4-7
Table of Contents