Toro Z MASTER 2000 Series Service Manual page 34

Toro Twin Cylinder Engine Removal (continued)
Engine: Service and Repairs
g335899
10. Disconnect the fuel supply line at the fuel filter.
g335900
11. Disconnect the throttle cable.
5–20)
12. Disconnect the choke cable.
5–22)
13. Disconnect the clutch wire from the clutch.
14. Remove the clutch mounting bolt and washers. Slip the clutch off of the
crankshaft.
Note: Before removing the clutch, note the orientation of the clutch wire
and the clutch.
15. Remove the engine pulley. Save the square key securing the pulley to the
crankshaft.
16. Remove the 4 engine mounting bolts.
Note: Before removing the engine mounting bolts, note the orientation of the
clutch anchor. The clutch wire can remain attached to the clutch anchor.
17. Lift the engine away from the frame.
Figure 7
Figure 8
Throttle Cable Assembly Replacement (page
Choke Control Assembly Replacement (page
Page 4–6 2000 Series Z MASTER® Service Manual
3438-778 Rev A