Toro Z MASTER 2000 Series Service Manual page 54

Right Console Removal (continued)
Right Console Installation
Chassis: Service and Repairs
g336085
1. Lower the console into place, while moving the control panel assembly
through the opening in the console and into position. Ensure that the console
seats properly on the supports.
Note: Before securing the control panel to the console, ensure that all cables
and electrical connections are seated firmly in place on the underside of
the control panel assembly.
g336086
2. Secure the control panel assembly to the console.
3. Install the 2 bolts and nuts through the support bracket.
4. Install the 2 (T25) screws through the console bracket.
Figure 28
Figure 29
Page 5–14 2000 Series Z MASTER® Service Manual
3438-778 Rev A