Assembling The Machine Head Support; Adjusting The Working Height - Dürkopp Adler 513 Operating Instructions Manual

88
6.3.3

Assembling the machine head support

Fig. 57: Assembling the machine head support
①
②
(1) - Machine head support
To assemble the machine head support:
1. Insert the machine head support (1) into the hole (2) of
the tabletop.
6.3.4

Adjusting the working height

Fig. 58: Adjusting the working height
①
②
(1) - Scale
(2) - Hole
(2) - Screws
Operating Instructions 513/533 - 01.0 - 09/2023
Setup