Region Selection Buttons Of The Device Control Block - Sony MVS-6520 User Manual

2
Select the bank of the transition control block you
want to set in the <Bank Select> group.
3
Press the button whose assignment you wish to
change.
4
Select the function you want to assign from the list on
the right.
5
Press [Set].
To cancel the assignment
Press [Clear].
To make the assignment the default
Press [Default].
Assigning Devices or Functions to
the Region Selection Buttons of the
Device Control Block
1
Open the Engineering Setup >Panel >Config
>Trackball Module menu (7321.17).
2
In the button indications on the left, press the button
for the assignment.
3
Select the device or function to be assigned.
4
Press [Set].
To cancel an assignment
Select the button, then press [Clear].
To return all button assignments to the factory
default state
Press [Default].
Inhibiting Utility Bus and Key
Operations
You can inhibit operations on the utility bus and keys of
the M/E and PGM/PST banks from the menu.
This inhibition applies to the following control blocks.
• Cross-point control block
• Transition control block
1
Open the Engineering Setup >Panel >Config >Util
Bus/Key Inhibit menu (7321.18).
2
In the list in the status area, select the switcher bank for
which operations are to be inhibited.
328
Overall Control Panel Settings
3
In the <Util Bus/Key Inhibit> group, press the utility
bus or key button ([Util1 Bus] or [Key1] to [Key4]) for
the operations to be inhibited.
Inhibiting DME Channel Selection
Operations
You can inhibit DME channel selection operations from
the device control block.
1
Open the Engineering Setup >Panel >Config >TB
Module DME Ch Inhibit menu (7321.27).
2
In the list in the status area, select the DME channel for
operations to be inhibited.
3
Press [Inhibit].
Assigning Functions to the Menu
Panel Top Menu and User Preference
Buttons
1
Open the Engineering Setup >Panel >Config >Menu
Panel menu (7321.19).
The left side of the status area shows the Top menu
selection buttons and user preference buttons. The
right side shows a list of the menus and actions that can
be assigned.
2
In the button indications on the left, press the button
for the assignment.
3
Select the menu or action to be assigned.
4
Press [Set] to confirm the setting.
To cancel an assignment
Select the corresponding button, then press [Clear].
To return all preview selection button
assignments to the factory default state
Press [Default].
Assigning Functions to the Buttons
in the Flexi Pad
You can assign functions to the buttons in the various parts
of the Flexi Pad in the following menus.
Mode selection buttons: Multi Function Module menu
Region selection buttons: Region Button Assign menu
Memory recall buttons: Multi Function Module menu