Table of Contents
Advertisement
64
CoolSmart TV - Fireplace Preparation
WARNING: In order to extract the heat properly from around the firebox, you will must remove (4) layers
of cover plates for each of the (4) flex attachment points on the top of the fireplace. Not
removing all of the cover plates can create hazardous conditions.
First Layer
Remove all (4) of the 5" knockouts (leave the square cover plates in place). Use snips or diagonal
cutters to snip the tab on the knockouts. Press on the far side away from the tab to pop the edge of
the knockout up. Grab on to the knockout with pliers and bend it back and forth until the remaining
tabs break free. Discard the knock out plate.
© Travis Industries
Optional Equipment
4/23/2021 - 1353
4415HO GSR2
Advertisement
Table of Contents
