Table of Contents
Advertisement
58
3. Under the second layer of knockout
plates, you will find cover plates held in
place with (2) ¼" screws. Use a nut
driver or drill with an extension to
remove the (2) screws. Reach in and
remove the cover plate. You may
discard the plates
4. Once the third layer is removed, a final
cover plate will be visible. Use a ¼"
nutdriver to loosen the screw securing
the plate. Reach in and rotate the
cover plate to uncover the final hole.
NOTE: The final plate does not get
removed from the fireplace, just rotated
to uncover the hole. Once the plate
has been rotated, tighten the screw to
lock the plate in place.
© Travis Industries
Optional Equipment
4/23/2021 - 1353
4415HO GSR2
Advertisement
Table of Contents
