Minimum Vent Configuration - FireplaceXtrordinair 4415 HO GSR2 Installation Manual

Minimum Vent Configuration

 Use 5x8" Diameter Coaxial Vent
 NOTE: Use the included pipe shield and both 8" firestops (use on front and back of
wall penetration).
 The termination must fall within the shaded area shown in the chart. Use the indicated
restrictor positions.
 One (30° or 45°) elbow may be used on the horizontal run.
 HINT: Use minimum vent kit "H" (96200332) from Travis Industries (additional vent
may be required).
© Travis Industries
Installation
(for qualified installers only)
4/23/2021 - 1353
27
4415HO GSR2