FireplaceXtrordinair 4415 HO GSR2 Installation Manual page 65

Second Layer

In each of the four holes, you will see the next layer of knockouts. Remove the knockouts using the
same technique described above.
Third Layer

Under the second layer of knockout plates, you will find cover plates held in place with (2) ¼" screws.
Use a nut driver or drill with an extension to remove the (2) screws. Reach in and remove the cover
plate. You may discard the plates.
© Travis Industries
Optional Equipment
4/23/2021 - 1353
65
4415HO GSR2