CoolSmart TV - Fireplace Preparation
1
Use snips or diagonal cutters to snip the tab on the knockouts. Press on the far side away from the tap to pop
the edge of the knockout up.
2
Grab on to the knockout with pliers and bend it back and forth until the remaining tabs break free. Discard the
knock out plate.
3
Under each knock out plate, you will find a cover plate held in place with (2) ¼" screws. Use a nut driver or
drill with an extension to remove the (2) screws. Reach in and remove the cover plate. You may discard the
plates.
© Travis Industries
Installation
(for qualified installers only)
4/22/21 - 1458
PB 72 MV/GSB2/GSR2 Install
73