Table of Contents
Advertisement
Gas Line Location
NOTE FOR RIGID PIPE: When using rigid pipe, you may wish to disconnect the shutoff valve from the fireplace
and route the pipe through the fireplace wall. First, disconnect the gas line from the shutoff valve (see step 1
below). Then remove the shutoff valve from the cover plate (4 screws outside fireplace). The pipe may be routed
through the cover plate and the shutoff valve and gas line may be re-attached inside the fireplace.
Gas line may be plumbed from the left side (stock) or below. See illustration and table below to determine gas line
location.
Left Side Gas Line Location (Stock)
Baseplate Gas Line Location
Relocating the Gas Line to the Baseplate
1.
Disconnect the gas line from the shutoff valve (3/4" wrench). Gas line is located inside the fireplace on the left
side.
2.
Remove the screw that holds the shutoff valve plate in place (1/4" nutdriver). Remove the shutoff valve plate.
3.
Remove the cover plate from the bottom of the fireplace (it is held in place in the same fashion as the shutoff valve
plate). Attach it to the left side of the fireplace.
4.
Attach the shutoff valve plate to the bottom of the fireplace. Route the gas line to the bottom and re-attach the gas
line to the shutoff valve. Make sure to leak test the entire gas line.
© Travis Industries
Installation
(for qualified installers only)
a
6-7/8" (175mm)
6-3/4" (172mm)
4/23/2021 - 1353
b
4-1/8" (105mm)
20-3/8" (518mm)
19
4415HO GSR2
Advertisement
Table of Contents
