Table of Contents
Advertisement
78
CoolSmart TV - Fireplace Preparation
1. Use snips or diagonal cutters to snip the tab on the knockouts. Press on the far side away from the tap to
pop the edge of the knockout up.
2. Grab on to the knockout with pliers and bend it back and forth until the remaining tabs break free.
Discard the knock out plate.
3. Under each knock out plate, you will find a cover plate held in place with (2) ¼" screws. Use a nut driver
or drill with an extension to remove the (2) screws. Reach in and remove the cover plate. You may
discard the plates.
© Travis Industries
Installation
(for qualified installers only)
4/19/23 - 1453
PB 42 & 54 MV/GSB2/GSR2 Install
Advertisement
Table of Contents
