Table of Contents
Advertisement
46
Follow the instructions in the gray box below for appliances made before July 2020.
For later units see the instructions immediately after the gray box.
2. Remove the three screws holding the screen in place (1/4" nutdriver- magnetic driver recommended). Then pivot
the screen down slightly until the clips on the bottom disengage from the glass frame.
Follow the instructions below for appliances made after July 2020.
The barrier screen has slotted brackets on top and tabs on the bottom. The slots on the top fit over tabs on the top of
the glass frame assembly. The bottom tabs on the barrier screen fit into slotted brackets on the bottom of the glass
frame assembly (see illustration below). Remove the barrier screen by following the steps below.
© Travis Industries
Installation
(for qualified installers only)
4/23/2021 - 1353
4415HO GSR2
Advertisement
Table of Contents
