Table of Contents
Advertisement
CoolSmart TV (Optional)
CoolSmart TV - Installation Overview
The CoolSmart system is designed to redirect the convective heat of the fireplace from the front of the
unit, just above the glass, to a location higher on the wall. The use of this kit allows for reduced clearance
to combustibles and accommodates TV installations closer to the fireplace or in recessed cavities above
the fireplace.
When using this kit, disregard the framing dimensions in the manual and follow the framing instructions
shown on page in this document. In addition, the use of this kit allows for combustible facing to be
installed over non-combustible board over the front of the fireplace (see section Combustible "Over-
Facing" section). All other installation requirements for the fireplace must be followed as detailed in the
appliance installation manual.
Ceiling
Min. 1-1/2" (39mm)
Max. 120"
(3048mm)
Min. 67-1/4"
(1709mm)
Min. 38-5/8"
(982mm)
0
© Travis Industries
Optional Equipment
Min. 1-1/4"
(32mm)
Television
12-1/2"
Min.
(318mm)
32-1/2"
(982mm)
Max. 3-1/8"
(80mm)
Optional Recessed Pocket
Min. 38-5/8" (982mm) above
base of fireplace
4/23/2021 - 1353
Combustible Facing
Allowed
to the top of
the zero-clearance box
Non-Combustible
Facing Only
4415HO GSR2
59
Advertisement
Table of Contents
