Micro Solid-State Drive (Mssd) - HP Split 13 x 2 PC Maintenance And Service Manual

micro Solid-state drive (mSSD)

Description
128-GB mSSD
64-GB mSSD
Before removing the solid-state drive, follow these steps:
1.
Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on,
and then shut it down through the operating system.
2. Disconnect the power from the tablet by unplugging the power cord from the tablet.
3. Disconnect all external devices from the tablet.
4. Remove the back cover (see
5. Remove the tablet battery (see
Remove the solid-state drive:
1. Remove the Phillips PM2.0×3.0 screw (1) that secures the solid-state drive to the system board.
(The solid-state drive tilts up.)
2. Remove the solid-state drive (2) by pulling the drive away from the slot at an angle.
40 Chapter 4 Removal and replacement preliminary requirements
Back cover on page 34).
Tablet battery on page
Spare part number
737218-001
737217-001
36).