Gvrp Enable (Interface); Garp Timer - 3Com 3CRUS2475 Command Reference Manual

446 C 32: GVRP C
HAPTER
gvrp enable
(Interface)

garp timer

OMMANDS
The gvrp enable Interface Configuration (Ethernet, port-channel) mode
command enables GVRP on an interface. To disable GVRP on an
interface, use the no form of this command.
Syntax
gvrp enable
no gvrp enable
Default Configuration
GVRP is disabled on all interfaces.
Command Mode
Interface Configuration (Ethernet, port-channel) mode
User Guidelines
An access port does not dynamically join a VLAN because it is always a
member in only one VLAN.
Membership in an untagged VLAN is propagated in the same way as in a
tagged VLAN. That is, the PVID is manually defined as the untagged
VLAN VID.
Example
The following example enables GVRP on Ethernet port g6.
Console(config)# interface ethernet g6
Console(config-if)# gvrp enable
The garp timer Interface Configuration (Ethernet, Port channel) mode
command adjusts the values of the join, leave and leaveall timers of GARP
applications. To restore the default configuration, use the no form of this
command.