80
C
5: E
HAPTER
THERNET
speed
C
C
ONFIGURATION
OMMANDS
Example
The following example adds a description to Ethernet port g5.
Console(config)# interface ethernet g5
Console(config-if)# description "RD SW#3"
The speed Interface Configuration (Ethernet, port-channel) mode
command configures the speed of a given Ethernet interface when not
using auto-negotiation. To restore the default configuration, use the no
form of this command.
Syntax
speed {10 | 100 | 1000| 10000}
Parameters
10 — Forces10 Mbps operation.
■
100 — Forces 100 Mbps operation.
■
1000 — Forces 1000 Mbps operation.
■
10000 — Forces 10000 Mbps operation.
■
Default Configuration
Maximum port capability
Command Mode
Interface Configuration (Ethernet, port-channel) mode
User Guidelines
There are no user guidelines for this command.
Example
The following example configures the speed operation of Ethernet port
g5 to 100 Mbps operation.
Console(config)# interface ethernet g5
Console(config-if)# speed 100