Vlan Allowed - 3Com 3CRUS2475 Command Reference Manual

vlan allowed

User Guidelines
There are no user guidelines for this command.
Example
The following example enters the Interface Configuration mode.
Console (Config-ap)# interface ethernet
Console (Config-ap-if)#
The vlan allowed AP interface Ethernet Configuration mode command
adds or removes VLANs to the Ethernet port of a wireless AP. To restore
the default configuration, use the no form of this command.
Syntax
vlan allowed {add vlan-list | remove vlan-list}
no vlan allowed
Parameters
add vlan-list — List of VLAN IDs to add. Separate nonconsecutive
■
VLAN IDs with a comma and no spaces; use a hyphen to designate a
range of IDs.
remove vlan-list — List of VLAN IDs to remove. Separate
■
nonconsecutive VLAN IDs with a comma and no spaces; use a hyphen
to designate a range of IDs.
Default Configuration
VLAN number 1.
Command Mode
AP interface Ethernet Configuration mode
User Guidelines
A VLAN cannot be removed from the allowed VLANs if it is defined as a
native VLAN.
Example
vlan allowed 357