Snmp-Server Community - 3Com 3CRUS2475 Command Reference Manual

19
snmp-server
community
SNMP C
OMMANDS
The snmp-server community Global Configuration mode command
configures the community access string to permit access to the SNMP
protocol. To remove the specified community string, use the no form of
this command.
Syntax
snmp-server community community [ro | rw | su] [ip-address] [view
view-name]
snmp-server community-group community group-name [ip-address]
no snmp-server community community [ip-address]
Parameters
community — Community string that acts like a password and permits
■
access to the SNMP protocol. (Range: 1-20 characters)
ro — Indicates read-only access (default).
■
rw — Indicates read-write access.
■
su — Indicates SNMP administrator access.
■
ip-address — Specifies the IP address of the management station.
■
group-name — Specifies the name of a previously defined group. A
■
group defines the objects available to the community. (Range: 1-30
characters)
view-name — Specifies the name of a previously defined view. The
■
view defines the objects available to the community. (Range: 1-30
characters).