Show Ports Security Addresses - 3Com 3CRUS2475 Command Reference Manual

74 C 4: A
HAPTER DDRESS
Field
Port
Status
Learning
Action
Maximum
Trap
Frequency
show ports security
addresses
T C
ABLE OMMANDS
g2 Unlock
ed
g3 Locked
The following table describes the fields shown above.
Description
The port number.
The values are: Locked/Unlocked.
The learning mode.
Action on violation.
The maximum number of addresses that can be associated on
this port in theStatic Learning mode or in the Dynamic Learning mode.
Sends traps in case of a violation.
The minimum time interval between consecutive traps.
The show ports security addresses Privileged EXEC mode command
displays the current dynamic addresses in locked ports.
Syntax
show ports security addresses [ethernet interface | port-channel
port-channel-number]
Parameters
interface — A valid Ethernet port.
■
port-channel-number — A valid port-channel number
■
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
Dynami - 28
c
Disabl Discar 8
ed d,
Shutdo
wn
- -
Disabl -
e