Interface Range Vlan - 3Com 3CRUS2475 Command Reference Manual

interface range vlan

Example
The following example configures VLAN 1 with IP address 131.108.1.27.
Console(config)# interface vlan 1
Console(config-if)# ip address 131.108.1.27
The interface range vlan Global Configuration mode command enables
simultaneously configuring multiple VLANs.
Syntax
interface range vlan {vlan-range | all}
Parameters
vlan-range — Specifies a list of VLAN IDs to be added. Separate
■
nonconsecutive VLAN IDs with a comma and no spaces; a hyphen
designates a range of IDs. (Range: 2-4094)
all — All existing static VLANs.
■
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
Commands under the interface range context are executed
independently on each interface in the range. If the command returns an
error on one of the interfaces, an error message is displayed and
execution of the command continues on the other interfaces.
Configuring all ports may consume an excessive amount of time. Define
only the required ports to save time.
Example
The following example groups VLANs 221, 228 and 889 to receive the
same command.
Console(config)# interface range vlan 221-228,889
Console(config-if)#
interface range vlan 457