3
ip access-list
permit (ip)
ACL C
OMMANDS
The ip access-list Global Configuration mode command enables the
IP-Access Configuration mode and creates Layer 3 ACLs. To delete an
ACL, use the no form of this command.
Syntax
ip access-list name
no ip access-list name
Parameters
name — Specifies the name of the ACL. (Range: 0-32 characters)
■
Default Configuration
The default for all ACLs is deny-all.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example shows how to create an IP ACL.
Console(config)# ip access-list ip-acl1
Console(config-ip-al)#
The permit IP-Access List Configuration mode command permits traffic if
the conditions defined in the permit statement match.