Sntp Unicast Client Poll; Sntp Server - 3Com 3CRUS2475 Command Reference Manual

sntp unicast client
poll

sntp server

Example
The following example enables the device to use the Simple Network
Time Protocol (SNTP) to request and accept SNTP traffic from servers.
Console(config)# sntp unicast client enable
The sntp unicast client poll Global Configuration mode command
enables polling for the Simple Network Time Protocol (SNTP) predefined
unicast servers. To disable the polling for SNTP client, use the no form of
this command.
Syntax

sntp unicast client poll

no sntp unicast client poll
Default Configuration
Polling is disabled.
Command Mode
Global Configuration mode
User Guidelines
Polling time is determined by the sntp client poll timer Global
Configuration mode command.
Example
The following example enables polling for SNTP predefined unicast
clients.
Console(config)# sntp unicast client poll
The sntp server Global Configuration mode command configures the
device to use the Simple Network Time Protocol (SNTP) to request and
accept SNTP traffic from a specified server. To remove a server from the
list of SNTP servers, use the no form of this command.
sntp unicast client poll 159