Show Wlan Aps Counters - 3Com 3CRUS2475 Command Reference Manual

366 C 24: W
HAPTER
show wlan aps
counters
AP G C
IRELESS ENERAL OMMANDS
Example
The following example displays information on an AP radio interface.
Console # show wlan ap AP1 interface ethernet
VLANs Allowed: 2, 3
Native VLAN: 2
Tunnel source: Enabled
Tunnel priority: 20
Ethernet MAC address: 00-9E-92-8C-73-FC
The show wlan aps counters Privileged EXEC mode command displays
information on the AP traffic.
Syntax
show wlan aps counters [radio a | g] [ap name]
Parameters
radio a | b — Specified Radio type. If unspecified shows the total
■
traffic on the AP.
ap name — Specified AP name. (Range: 1-32 characters)
■
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example