Power - 3Com 3CRUS2475 Command Reference Manual

496 C 35: W
HAPTER

power

AP R C
IRELESS ADIO OMMANDS
The power AP Interface Radio Configuration mode command configures
the power level. To restore the default configuration, use the no form of
this command.
Syntax
power {max | half | quarter | eighth | min}
no power
Parameters
max — Maximum power.
■
half — Half of the maximum power.
■
quarter — Quarter of the maximum power.
■
eighth — Eighth of the maximum power.
■
min — Minimum power.
■
Default Configuration
Maximum power.
Command Mode
AP Interface Radio Configuration mode
User Guidelines
The maximum power depends on the country code that was set by
■
the wlan country-code Global Configuration command.
The power is off if the wlan tx-power off Global Configuration
■
command was activated.
Example
The following example configures the power level to half the maximum
power.
Console (Config-wlan-ap)# interface radio 802.11g
Console (Config-wlan-ap-radio)# power half