port security routed
secure-address
Command Mode
Interface Configuration (Ethernet, port-channel) mode
User Guidelines
There are no user guidelines for this command.
Example
In this example, port security mode is set to dynamic for Ethernet
interface g7.
Console(config)# interface ethernet g7
Console(config-if)# port security mode mac-addresses
The port security routed secure-address Interface Configuration
(Ethernet, port-channel) mode command adds a MAC-layer secure
address to a routed port. Use the no form of this command to delete a
MAC address.
Syntax
port security routed secure-address mac-address
no port security routed secure-address mac-address
Parameters
mac-address — A valid MAC address.
■
Default Configuration
No addresses are defined.
Command Mode
Interface Configuration (Ethernet, port-channel) mode. Cannot be
configured for a range of interfaces (range context).
User Guidelines
port security routed secure-address
65