Bridge Aging-Time; Clear Bridge - 3Com 3CRUS2475 Command Reference Manual

62 C 4: A
HAPTER DDRESS

bridge aging-time

clear bridge

T C
ABLE OMMANDS
The bridge aging-time Global Configuration mode command sets the
address table aging time. To restore the default configuration, use the no
form of this command.
Syntax
bridge aging-time seconds
no bridge aging-time
Parameters
seconds — Time in seconds. (Range: 10-630 seconds)
■
Default Configuration
The default setting is 300 seconds.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
In the following example, the bridge aging time is set to 250 seconds.
Console(config)# bridge aging-time 250
The clear bridge Privileged EXEC mode command removes any learned
entries from the forwarding database.
Syntax
clear bridge
Default Configuration
This command has no default configuration.