3Com 3CRUS2475 Command Reference Manual page 288

288 C 19: SNMP C
HAPTER OMMANDS
auth-md5 password — Indicates the HMAC-MD5-96 authentication
■
level. The user should enter a password for authentication and
generation of a DES key for privacy. (Range: 1-32 characters)
auth-sha password—Indicates the HMAC-SHA-96 authentication
■
level. The user should enter a password for authentication and
generation of a DES key for privacy. (Range: 1-32 characters)
auth-md5-key md5-des-keys — Indicates the HMAC-MD5-96
■
authentication level. The user should enter a concatenated
hexadecimal string of the MD5 key (MSB) and the privacy key (LSB). If
authentication is only required, 16 bytes should be entered; if
authentication and privacy are required, 32 bytes should be entered.
Each byte in the hexadecimal character string is two hexadecimal
digits. Each byte can be separated by a period or colon. (16 or 32
bytes)
auth-sha-key sha-des-keys — Indicates the HMAC-SHA-96
■
authentication level. The user should enter a concatenated
hexadecimal string of the SHA key (MSB) and the privacy key (LSB). If
authentication is only required, 20 bytes should be entered; if
authentication and privacy are required, 36 bytes should be entered.
Each byte in the hexadecimal character string is two hexadecimal
digits. Each byte can be separated by a period or colon. (20 or 36
bytes)
Default Configuration
No group entry exists.
Command Mode
Global Configuration mode
User Guidelines
If auth-md5 or auth-sha is specified, both authentication and privacy are
enabled for the user.
When a show running-config Privileged EXEC mode command is
entered, a line for this user will not be displayed. To see if this user has
been added to the configuration, type the show snmp users Privileged
EXEC mode command.
An SNMP EngineID has to be defined to add SNMP users to the device.
Changing or removing the SNMP EngineID value deletes SNMPv3 users
from the device's database.