470
C
34: 802.1
HAPTER
dot1x
system-auth-contro
l
dot1x port-control
C
X
OMMANDS
Example
The following example uses the aaa authentication dot1x default
command with no authentication.
Console# configure
Console(config)# aaa authentication dot1x default none
The dot1x system-auth-control Global Configuration mode command
enables 802.1x globally. To restore the default configuration, use the no
form of this command.
Syntax
dot1x system-auth-control
no dot1x system-auth-control
Default Configuration
802.1x is disabled globally.
Command Modes
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example enables 802.1x globally.
Console(config)# dot1x system-auth-control
The dot1x port-control Interface Configuration mode command
enables manually controlling the authorization state of the port. To
restore the default configuration, use the no form of this command.
Syntax
dot1x port-control {auto | force-authorized | force-unauthorized}
no dot1x port-control