Sntp Unicast Client Enable - 3Com 3CRUS2475 Command Reference Manual

158 C 10: C
HAPTER
sntp unicast client
enable
C
LOCK OMMANDS
Default Configuration
The SNTP client is disabled on an interface.
Command Mode
Interface Configuration (Ethernet, port-channel, VLAN) mode
User Guidelines
Use the sntp anycast client enable Global Configuration mode
command to enable anycast clients globally.
Example
The following example enables the SNTP client on Ethernet port g3.
Console(config)# interface ethernet g3
Console(config-if)# sntp client enable
The sntp unicast client enable Global Configuration mode command
enables the device to use the Simple Network Time Protocol (SNTP) to
request and accept SNTP traffic from servers. To disable requesting and
accepting SNTP traffic from servers, use the no form of this command.
Syntax

sntp unicast client enable

no sntp unicast client enable
Default Configuration
The SNTP unicast client is disabled.
Command Mode
Global Configuration mode
User Guidelines
Use the sntp server Global Configuration mode command to define
SNTP servers.