Bss Enable - 3Com 3CRUS2475 Command Reference Manual

29
bss

bss enable

W
IRELESS
The bss Interface Radio Configuration mode command adds or removes
ESS to/from a radio interface.
Syntax
bss {add {ess-index | ssid} | remove {ess-index | ssid}}
Parameters
ess-index — The ESS index. (Range: 1-65535)
■
ssid — The SSID string of the ESS. (Range: 1-32 characters)
■
Default Configuration
The default ESS is automatically added to the radio interface.
Command Mode
AP Interface Radio Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example adds an ESS to a radio interface called 'enterprise'.
Config# wlan ap CR1 config
Console (Config-ap)# interface radio 802.11g
Console (Config-ap-radio-if)# bss add enterprise
The bss enable Interface Radio Configuration mode command places
the device in BSS configuration mode.
AP BSS C
OMMANDS