Dx8010 Telephone Module Configuration - Bosch DS7200V2-UK Installer's Manual

Parity, Flow Control, Stop Bit Configuration
• Address: 1255
• Default: 0
• Selections: 0-7
Selection
Default 0
1
2
3
4
5
6
7
49.0

DX8010 Telephone Module Configuration

DX8010 Access Options
• Address: 1256
• Default: 0
• Selections: 0-15
DX8010 Access Options
Disabled, No DX8010 Connected
Access Granted to Users with Authority Level 1
Access Granted to Users with Authority Level 2
Access Granted to Users with Authority Level 3
Access Granted to Users with Authority Level 4
Set this parameter to zero (0) if there are no DX8010 modules connected to the control panel, or to disable any DX8010
modules that are connected to the control panel.
Selecting any of the other options allows system control for users assigned to the chosen authority level.
The DX8010 is currently not available.
Page 100 P/N: 4998152533-02
PART IV: CONTROL PANEL PROGRAMMING
Parity
None Odd
X
X
X
X
X
X
Copyright  2007 Bosch Security Systems, Inc.
Flow Control
Even Software Hardware
X
X
X
X X
X
Enter This Data Digit to Select Options
0 1 2 3 4 5 6
•
• • •
• • • •
• • • •
Stop Bits
1
X
X X
X
X
X X
X
X X
7 8 9 10 11 12 13 14 15
• • • •
• • • •
• • • •
• • • • • • • •
DS7200V2-UK Installer's Guide
2
X
X
•