Part I: Introduction; Documentation Conventions; Type Styles Used; Notes, Cautions, And Warnings - Bosch DS7200V2-UK Installer's Manual

Part I : Introduction
1.0

Documentation Conventions

1.1

Type Styles Used

To help identify important items in the text, the
following type styles are used:
Bold text Indicates important text or terms that
you should note.
Italicized text Refers you to a drawing, table, or
other section of this document.
[7][8][9][0] Bracketed numbers represent
keypad keys. When next to one
another, they represent the key
sequence to press for a particular
function. For this example, pressing
the keys shown enters the default
Installer PIN.
{01} Numbers in braces represent control
panel events. See Control Panel
Events and Reporting Formats on
page 124 for more information.
1|6 Numbers separated by a vertical bar
represent output function types. This
example is for Output Function Type
1|6: Strobe.
1.2

Notes, Cautions, and Warnings

Throughout this document there are notes that
address personal and/or equipment safety issues,
system operation issues, etc. They are set off as
follows:
The Important Note identifies information
intended for successful operation.
The Caution Note identifies information
intended to prevent an incident that may
prohibit the functionality of the
program/equipment.
The Warning Note identifies information
intended to prevent an incident that may
prohibit the functionality of the
program/equipment and/or personal injury.
DS7200V2-UK Installer's Guide
Copyright  2007 Bosch Security Systems, Inc.
1.3

Other Conventions

Programming parameter titles are identified as
follows:
Programming Parameter Title
1.4

Scope of Document

See below for an overview of this document and other
documents related to the DS7240V2/DS7220V2
Control Panels:
Document Part Number
User's Guide 4998152530
System 4998152532
Worksheet
Installer's Guide 4998152533
(this document)
Expert 4998153891
Programming
Guide
Release Notes 4998152534

Table 2: Document Overview

Description
Contains keypad
operation instructions
for the end-user.
Covers use of the
LCD (text) keypad
and the LED keypad.
Contains all
programming
parameter defaults
and space to record
any default changes
made during setup of
the control panel.
Contains all wiring
and setup
instructions, and
basic programming
parameters with
descriptions.
Troubleshooting
information also
included.
Contains all
programming
parameters with
descriptions and
keypad programming
instructions.
Contains issues with
control panel that
were found after
printing of the
documentation.
P/N: 4998152533-02 Page 7

PART I: INTRODUCTION