Use the following steps to install a DX4020 in the
CX1011 Enclosure:
1.
Mount the DX4020 to the B234 Angle Bracket
(sold separately) using the screws supplied with
the DX4020. See Figure 47 .
Screws supplied
with DX4020
Back of B234
Angle Bracket
Figure 47: Mounting the DX4020 (Step 1)
2.
Insert the B234's hooks into the mounting slots
in the back wall of the CX1011 Enclosure. See
Figure 48.
Screw Hole
Hook
Slot
Enclosure Back Wall
Figure 48: Mounting the DX4020 (Step 2)
DS7200V2-UK Installer's Guide
Back of DX4020
Back of B234
Angle Bracket
Back of DX4020
Copyright 2007 Bosch Security Systems, Inc.
3.
Pull the B234 down so that its hooks are flush
in the mounting slots. See Figure 49 .
Screw Hole
Hooks flush
with Slots
Enclosure Back Wall
Figure 49: Mounting the DX4020 (Step 3)
4.
Secure the B234 to the CX1011 enclosure wall
with the screw supplied with the B234. See
Figure 50 .
Mounting Screw
Enclosure Back Wall
Figure 50: Mounting the DX4020 (Step 4)
P/N: 4998152533-02
PART II: SYSTEM INSTALLATION AND SETUP
Back of B234
Angle Bracket
Back of DX4020
Front of B234
Angle Bracket
Front of
DX4020
Page 29